Tracked reconnaissance rover
Has open items: see Verification.

Drag to orbit, pinch to zoom, tap a part to name it.

The robot
Integrated assembly from final_robot.step: 107 placed parts, 31 distinct parts, one node per part named as in the assembly

Integrated assembly from final_robot.step: 107 placed parts, 31 distinct parts, one node per part named as in the assembly

Tracked reconnaissance rover

An unarmed, remotely driven tracked ground rover for military reconnaissance and route survey. It carries a 15 kg pan-tilt payload with day and thermal cameras. An operator drives it from an operator control unit over an encrypted radio link with up to 1 km line of sight. Missions last 4 hours on a 48 V Li-ion battery. It must handle rough outdoor terrain with 30 degree slopes and 20 cm steps. It has an IP67 aluminium hull, is built in low volume, and the BOM must stay under 25000 USD.

An unarmed, remotely driven tracked ground rover for military reconnaissance and route survey. It carries a 15 kg pan-tilt payload with day and thermal cameras. An operator drives it from an operator control unit over an encrypted radio link with up to 1 km line of sight. Missions last 4 hours on a 48 V Li-ion battery. It must handle rough outdoor terrain with 30 degree slopes and 20 cm steps. It has an IP67 aluminium hull, is built in low volume, and the BOM must stay under 25000 USD.

Mass (lower bound)
159.3 kg
Overall size along x
1.198 m
Overall size along y
1.339 m
Overall size along z
1.1 m
Placed mechanical parts
107
Distinct mechanical parts
31
BOM lines
53
Circuit boards
1
Schematics
3
Actuators in the simulation model
4
Required payload
15 kg
Required runtime target
4 h

What it is made of

Bought parts4× Dunkermotoren GmbH (AMETEK) BG 95x120 dPro CO/IO 48 V (Safe Torque Off version) + PLG 95 HT 2-stage i=50 (combination; order codes not printed in the held documents), Blickle Räder+Rollen GmbH u. Co. KG ALBS 300/25K (Blickle ID 752956, EAN 4047526111533), Connect Tech Inc. ESG605-19 +17 more20

mechanical occurrence

  • 4×Dunkermotoren GmbH (AMETEK) BG 95x120 dPro CO/IO 48 V (Safe Torque Off version) + PLG 95 HT 2-stage i=50 (combination; order codes not printed in the held documents)datasheet envelope

    motor_controller:motor_drive:gate_driver (SELECTED)

mechanical bought parts

  • Blickle Räder+Rollen GmbH u. Co. KG ALBS 300/25K (Blickle ID 752956, EAN 4047526111533)datasheet envelope

    left mid-span road wheel (bought Blickle 300 mm polyurethane wheel with ball bearing) bearing on the left track's lower run

uninstantiated

  • Connect Tech Inc. ESG605-19not placed

    compute:video (SELECTED)

  • Doodle Labs RM-2450-2LSX-SA-ST-Cnot placed

    radio:link (SELECTED)

  • Axis Communications AB 02125-001 (AXIS M2036-LE, white)not placed

    camera:drive (SELECTED)

  • Pelco, Inc. (a Motorola Solutions company) ESCE1-2X40V24-RLUBnot placed

    payload:eo_ir (SELECTED)

  • SparkFun Electronics GPS-29208not placed

    gnss:survey (SELECTED)

  • FORT Robotics VSC-006-901not placed

    safety:remote_estop (SELECTED)

  • Ewert Energy Systems, Inc. (Orion BMS) Orion BMS 2, 24 Cell configurationnot placed

    bms:pack_monitor (SELECTED)

  • 4×Dunkermotoren GmbH (AMETEK) E 600 R (power-off brake for BG 95; order code with the motor combination not printed in the held documents)not placed

    holding_brake:bg95x120_dpro_48v_sto_plg95ht_i50 (PROVISIONAL)

  • Moxa Inc. INJ-24A-Tnot placed

    poe_source:camera:drive (SELECTED)

  • Bel Fuse Inc. (CUI Inc brand; datasheet header "CUI Inc") VHK200W-Q48-S24not placed

    dc_dc:24V_safe_state (SELECTED)

  • Bel Fuse Inc. (CUI Inc brand; datasheet header "CUI Inc") VHK200W-Q48-S24not placed

    dc_dc:24V_1 (SELECTED)

  • Bel Fuse Inc. (CUI Inc brand; datasheet header "CUI Inc") VHK200W-Q48-S24not placed

    dc_dc:24V_2 (SELECTED)

  • Bel Fuse Inc. (CUI Inc brand; datasheet header "CUI Inc") VHK50W-Q48-S5not placed

    dc_dc:5V (SELECTED)

  • TE Connectivity (KILOVAC) EV200AAANAnot placed

    torque_removal:contactor (PROVISIONAL)

  • SCHURTER AG 3-156-394not placed

    protection:main_fuse (PROVISIONAL)

  • Schneider Electric XB4BS8442not placed

    safety:estop (SELECTED)

  • Littelfuse, Inc. KLKD010.Tnot placed

    protection:always_on_branch_fuse (PROVISIONAL)

  • 403×E-One Moli Energy Corp. (Molicel) INR-21700-P45Bnot placed

    pack cells, 13S31P

BatteryE-One Moli Energy Corp. (Molicel) INR-21700-P45B
  • E-One Moli Energy Corp. (Molicel) INR-21700-P45Bnot placed

    the pack's cell

    Chemistry
    li_ion
    Cells in series
    13
    Parallel strings
    31
    Configuration
    13S31P
    Nominal voltage
    46.8 V
    Capacity
    133.3 Ah
    Energy (nameplate)
    6238 Wh
    Swappable
    not recorded
Custom boardscontroller_board
  • controller_board

    custom circuit board designed for this robot

Made parts by material2× asa_fdm, 96× al6061_t6, 2× elastomer_track +1 more4
  • 2×asa_fdm

    material of the made parts below

    1 part
    • printed antenna and handling arch over the rear deck (two printed halves meeting under the mast clamp)×2 · fdm_3d_print
  • 96×al6061_t6

    material of the made parts below

    25 parts
    • machined backing strip under a sheet base: one tapped hole behind each seat bolt×4 · cnc_machined
    • machined backing strip under a sheet base: one tapped hole behind each seat bolt×40 · cnc_machined
    • bumper beam: lipped channel bolted to the fairing face, tie-down slots at its ends×2 · laser_cut_bent_sheet
    • machined drive-camera bracket on the deck×2 · cnc_machined
    • machined connector bulkhead over the tail glacis window×1 · cnc_machined
    • formed payload rail on the deck with accessory slots×2 · laser_cut_bent_sheet
    • mounting interface for the 15 kg pan-tilt day/thermal camera payload×1 · cnc_machined
    • machined grab handle on the guard deck×2 · cnc_machined
    • front loop-guard end cap: laser-cut closure with a riveted tab×2 · laser_cut_bent_sheet
    • rear loop-guard end cap: laser-cut closure with a riveted tab×2 · laser_cut_bent_sheet
    • machined finned heat-sink plate on the shell's rear wall×2 · cnc_machined
    • left loop guard: chined deck over the loop, creased skirt, raked ends×1 · laser_cut_bent_sheet
    • right loop guard: chined deck over the loop, creased skirt, raked ends×1 · laser_cut_bent_sheet
    • machined mast collar on the arch, set-screwed to the mast×1 · cnc_machined
    • machined mast head: antenna plate and hub×1 · cnc_machined
    • nose fairing: coaming lip, two-facet glacis, bumper face×1 · laser_cut_bent_sheet
    • machined standoff pad the nose fairing's wall flange is bolted through×10 · cnc_machined
    • bolted, gasketed hull lid carrying the payload flange×1 · laser_cut
    • left road-wheel stub axle, seated in the +Y side wall's support-axle bore, carrying the left road wheel outboard×2 · cnc_machined
    • IP67 sealed hull and chassis: carries the four corner gearmotors and the two road-wheel stub axles on its side walls, and the battery and electronics on its floor×1 · laser_cut_sheet_seam_welded
    • machined service hatch cover over the deck opening (gasketed, captive screws into tapped strips under the deck, recessed grip)×1 · cnc_machined
    • skid plate: flat under the shell floor, upturned approach and departure ends×1 · laser_cut_bent_sheet
    • tail fairing: coaming lip, two-facet glacis, bumper face×1 · laser_cut_bent_sheet
    • machined standoff pad the tail fairing's wall flange is bolted through×10 · cnc_machined
    • track drive wheel (sprocket) keyed on a gearbox output shaft; the track loop wraps its rim×4 · laser_cut
  • 2×elastomer_track

    material of the made parts below

    2 parts
    • left elastomer track loop (ground contact)×1 · moulded_elastomer
    • right elastomer track loop (ground contact)×1 · moulded_elastomer
  • cfrp_rollwrapped_tube

    material of the made parts below

    1 part
    • stock-tube mast×1 · tube_frame_fabrication